By Scott Conboy 0 comments

Your Hand May Be at Risk of Getting Exposed to Workplace Hazards Without Proper Protection

In a workplace, injuries are not always avoidable because of the different hazards present at all times. The most common type of injury that happens in a workplace is the injury to the hands. Compared to having injuries on the other body parts, experiencing hand injuries is the most prominent in workplaces such as in the electric, gas, telecommunications construction, and other construction industries. The hands of the employees are always exposed to very harsh conditions and especially to the possibilities of being injured when working with chemicals, electricity, heavy objects, large machines, moving parts, and along with other tools and equipment. The National Safety Council or NSC released a study in the year 2013 and stated there that the injuries to the hands made up sixteen and a half percent of all workplace injuries in the year 2010. An average hand injury does not only cost a lot of lost workdays or lost company production but it can also cost an estimated amount of $3,700.00. All of these injuries and the corresponding costs that they have caused could have been and would have been prevented only if the proper hand protection was used and utilized by the employees.

One essential way to prevent such hand injuries in each and every workplace and job site is to conduct safety programs such as hazard awareness seminars, hazard awareness training, hazard analysis, assessment, and more discussions that are compulsory for all workers to attend in order for them to obtain both safety and productivity. Hand safety programs for jobs that require hand protection should include discourses about: working with specific tasks that can lead to hand cuts, hand burns, and hand abrasion; handling tools, equipments, materials, or anything that have sharp, jagged, or splintered edges; handling molten solder or compounds, or anything that could produce heat or cause chemical burns; and climbing poles or ladders.

To have proper hand protection in workplaces, work gloves or safety gloves should be worn all throughout the work hours. Safety gloves not only cover and protect your hands but it also helps you do your work both efficiently and effectively provided that hand and glove sizing is done correctly. Safety gloves that are too small may be stretched out more than it possibly can and it could result in them to be torn or ripped apart while safety gloves that are too large may also be easily worn off or pulled off from your hand. Wearing work gloves and safety gloves that fits your hand with your accurate sizing or measurement can guarantee you a proper hand protection in your workplace.

You don’t even need to worry about the price. There are several shops with wholesales work gloves at reasonable prices. Scotty’s Gloves is one of the renowned wholesales of the best glove brands.  From there you will be able to select a variety of wholesale work gloves with quality and agreeable price.

Aside from wearing work gloves or safety gloves that fit perfectly in the hands, employees must also use work gloves or safety gloves that are particularly designed for the specific set of tasks to be done and for the different kinds of hazards found in their workplaces. The following are some of the factors and features to be considered in choosing the right work gloves or safety gloves to wear in a certain workplace:

  • - Grip ability;
  • - Flexibility;
  • - Dexterity;
  • - Resistance to abrasions;
  • - Resistance to punctures;
  • - Resistance to tears;
  • - Resistance to cuts;
  • - Comfortability;
  • - Chemical permeability;
  • - Temperature and temperature changes; and
  • - High and low voltage

However, there are circumstances that wearing work gloves or safety gloves would affect the clean application of some types of materials. Nevertheless, ensure that your hands are still being protected when working on an electric circuit or conductor that is disconnected from a power supply. The following are some situations in which wearing work gloves or safety gloves would not be logical:

  • - Working with waterproofing materials;
  • - Working with stress relief materials;
  • - Working with mastics or Hi-K putty;
  • - Cleaning cable insulation;
  • - Pre-insulating paper and lead splices;
  • - Locating oil-insulated papers or insulation of cables;
  • - Confined areas like junctions of three-conductor splices; and
  • - Installing any kind of tape like varnished cambric oil tapes or vinyl tapes

Your hands are one of the most used body parts when working so take good care of them! Get correct-fitting work gloves and make sure you choose safety gloves that are suitable for your tasks and workplace. Search for high-quality wholesales work glove.. Most importantly, keep your hands safe against hazards with proper hand protection to avoid all kinds of costs and injuries.